How to Measure a Chainsaw Bar (Blade) and Chain Length

Are you willing to change your Chainsaw bar and chain? But don’t know how to do it because you are unaware of measurements. So, this article is going to teach you easy steps on how to measure chainsaw bar length.

Before moving further, you must have basic knowledge of your product. A chainsaw is a versatile, mechanical saw that cuts with many teeth connected to a revolving chain that runs along a measurement bar. Therefore, you have to identify your product usage first.

Usage :

• Tree felling
• Limbing
• Kicking
• Brushing and slashing
• Cutting firebreaks in wildland fire concealment

Moreover, If your product does not fall in the above categories, you can also visit What Size Chainsaw Do I Need? for detailed information w.r.t the size of the chainsaw. Before starting, ensure you have fundamental working information on your cutting tool and its tasks.

A small chainsaw has less capacity to work on a hard surface than one with a heavy engine. If you want more information about cutting a tree for better performance then we recommend you to visit How to Cut Down a Tree Safely.

Despite oiling and maintenance, sometimes it becomes necessary to change the Chainsaw chain/blade to make it work more efficiently.

How to Measure Chainsaw Bar Length [Quick & Easy Steps]:

Consequently, Every Chainsaw has its bar length. Longer the bar higher the power consumes. Electric Chainsaw has no longer capable of 18 inches bar. Whereas gas ones can have 72 inches long bar.

You need to consider two lengths at the time of purchasing the Chainsaw blade:

• True length
• Effective length

Everything is briefly discussed below:

1. True length

   This is the actual length of the bar from one point to another before it is inserted into Chainsaw.

   

    

    

   Measurement: With the bar eliminated, place it on a level surface and utilize a measuring tape to get the estimation.

    

2. Effective length

   Also known as called length. It is the distance between the start of the blade to the point it is attached to the Chainsaw.

   

   Measurement: Place the bar inside the Chainsaw and use a measuring tape to get the measurements.

Tip: Round to the nearest inch. If length is 17.75 inches consider it 18 inches.

Measuring a Chain Length:

It might be a bit trickier as it has four parts.

• Tooth count/drive links
• Pitch
• Gauge
• Cutting length

1. Tooth count/drive links:

   Pieces on the chain join together and make it in the form of shark teeth.

2. Pitch:

   Pitch is determined by measuring the distance between 3 rivets from center to center and then dividing it by 2. Commonly pitch sizes are 1/4″, .325″, 3/8″, and .404″.

3. Gauge:

   Width of the groove that fits on the chain. Mostly gauges measurement .043″, .050″, .058″, and .063″. You can use a measuring tape to find these measurements.

4. Cutting length:

   Also known as the guide bar, this is the actual length you will use during your work.

   

The following are some of the easy steps that will help you take proper chain length measurements.

1. Initially, stretch your chain over a level surface and start to sum the number of tooth counts around the chain. Record this number when you have included the connections since you will require it later in your conclusive outcomes.
2. Measure your pitch.
3. Last, determine the chainsaw gauge. It can be done through the Vernier caliper and Coin method.

   

   
   Coin method:
   The coin technique is an estimating strategy to give you a guess on your cutting apparatus and check the width. It is finished by setting a quarter, dime, or penny in the middle of the guide bar grooves until one of those choices fits easily.

   
   Tip: To have the best Chainsaw length try to have its length 2 inches longer than the object you are about to cut.
   
   Measurement secret: Now, when you know the whole measuring process. Let me tell you the measuring secret: take off the blades from the chain saw you will see a set of smaller numbers printed on its end. This is the complete information that you need to get a matching chain.

Don’t Do:

Never guess at measurements on the base of your experience. This not only makes you buy the wrong blade as well as it will damage your tool. Therefore, it is recommended to have measurements very carefully and accurately.

Summary:

Following these simple steps, you can easily measure a chainsaw bar (blade) and chain. Knowing its pitch, gauge, and tooth count, you can get the measurements through measuring tape.

We hope you get all that through the article you were searching for. If you have any questions or queries about this article, feel free to ask in the comment section below. Your feedback is always appreciated.

If you want to learn more about a chainsaw, consider our other how-to articles like How to Use a Chainsaw Proficiently and How to Start a Chainsaw? Happy Woodcutting!

Related Chainsaw Buying Guides:

• Top 10 Best Chainsaw Reviews 2022 (Reviews & Buyer’s Guide)
• Top 10 Best Cordless Chainsaw 2022 | Best Battery Chainsaw Reviews